AC Surge Protection
... Service Entrance
... Branch Panel
... Equipment Level

Coaxial Protection
...

...

...

Data Line Surge Protection
... Din Rail Mount
... Wallmount
... Surface Mount
... Rackmount

DC Surge Protection
... Grid Tie
... Off Grid

Gas Discharge Tubes
... 2 Electrodes
... 3 Electrodes
... Specialty

Grounding Tips
Warranty
Job Opportunities

2,4,8 Wires, Wall Mount
Screw Terminal
B180, B280 & B480 series wall mountable surge protectors have been designed to protect your sensitive telephone, datacom and instrumentation equipment against harmful lightning surges and electrical transients.

2,4 Wires, Din Rail
Screw Terminal
Citel DLA series DIN Rail mountable surge protectors have been designed to protect your sensitive telephone, datacom and instrumentation equipment against harmful lightning surges and electrical transients.

16-64 Wires, Wallmount
Screw Terminal, QC66, ATT110
The E280 concept is based on the use of plug-in modules to protect
telecom and data lines. The E280 line covers all multi-line telephone
(PBX) and data installation configurations: there is an E280 module that is suitable to support for every type data line and/or ac power line to 220Vac.

8 Wires, Surface and Din Rail Mount
RJ45/RJ11
Designed to protect Power-Over-Ethernet (POE) (Mode B) network devices with transmission speeds up to 100BaseT. All eight pins are protected by a carefully designed circuit that isolates data from
ethernet power lines. The ultra-sharp clamping response permanently eliminates transients from your POE applications.

16, 32 Ports, Rackmount
RJ45 to RJ45
The RAK series of Rack Mount and Wall Mount Standoff protectors will ensure the reliable operation of networked equipment connected to 10/100/1000BASE T Ethernet, PoE, Cable, CCTV, RS422, RS232, ISDN, T1, DDS, Dial-up and most other communication interfaces.

12, 24 and 48 Ports, Rackmount
110 Punchdown to RJ-45
The PCH Series protects 12, 24, and 48 port,19” rack mounted protection units that feature 110 punchdown to RJ45 connectors. This series feature CAT6 performance for today’s high speed data networks. These production are also available in configurations that offer surge protection to Telco and ISDN circuits.

9,15,25 Wires, Surface Mount
DB9, DB15, DB25 Connectors
The DD Series are D-sub DC signal line surge protectors that are designed to protect your sensitive telephone, datacom, and instrumentation equipment against harmful lightning surges and electrical transients. They are available in RS232, RS422, RS485 or other customized versions.