Citel Surge Protectors and Lightning Protection for AC Power Lines - Surge Suppression for Single Phase Circuits, Cellular and Wireless Base Station, Main Electrical Panels


SurgePurge 120
	Citel’s SurgePurge 120 model provides superior surge suppression capability for your facility’s branch distribution panels. Installed within close proximity to sensitive equipment, and coordinated with upstream protectors, the device will enhance your overall protection system and reduce your let-through voltages dramatically. These protectors incorporate Citel’s extremely reliable “high intensity” modules with individually monitored and fused MOVs.
120ka/phase	data sheet

M100
	Citel’s M100 Series are specification grade surge protection for service entrance or critical branch panels. The SPD are available for all your single and three phase applications up to 480Vac. With 100,000 amps of surge handling capacity and EMI/RFI noise filtering, the M100 Series are rugged yet refined SPD's. Equipped with real-time LED fault indicators, remote contacts, audible alarm and abnormal N-G voltage detection these devices provides much more power quality information than your typical TVSS.
100ka/phase 8/20us	M100
M Series Installation: Click here for picture
M80
	Citel’s M80 Series are designed for branch panels applications. These SPD's are available for all your single and three phase applications up to 480Vac.
80ka/phase 8/20us	M80

CDS44
	Citel's CDS44 surge protectors are used mainly to protect distribution panels for sensitive loads. Each pluggable module provides heavy-duty protection, 40kA per phase, for a high level of reliability. The products are available in single-phase and three-phase configurations with remote alarm contacts. Housed in a NEMA 4X enclosure for indoor or outdoor applications.
40-70ka/phase	data sheet

DS70R
	Citel’s DS70R surge protectors are used to protect distribution panels for sensitive loads. Each pluggable module provides heavy-duty protection, 70kA per phase, with two calibrated disconnection levels for redundancy. The products are available in single-phase and three-phase configurations with an optional remote alarm available.
70ka/phase	data sheet

DS40
	Citel’s DS40 surge protectors are used mainly for distribution panels of single-phase and three-phase networks. They provide common-mode protection (between the active conductors and ground) and are available with an option remote alarm. The DS40 is built with a plug-in module and a fixed base, which allows for easy access to protection modules.
40ka/phase	data sheet

M40/M18
40ka/phase data sheet	The compact, low profile products are designed to protect local distribution panels, OEM control panels, PLC’s, and SCADA systems against transient surge events. These devices are installed parallel to the AC network and provide robust surge handling capability. The M40 is available for all three phase applications and is rated at 40kA (8/20µs) transient amps per phase. The M18 is a single phase device with a transient amp rating of 36kA (8/20µs). The M40 and M18 are pre-wired and installed via a case molded back nipple. Installation can be performed in less than 5 minutes. Power up the device and front panel LEDs provide instant visual status indication.