|
|
2,4,8, Wire, Wall Mount
Screw Terminal
B180, B280 & B480 series wall mountable surge protectors have been designed to protect your sensitive telephone, datacom and instrumentation equipment against harmful lightning surges and electrical transients.
|
|
2,4, Wire, Din Rail
Screw Terminal
Citel DLA series DIN Rail mountable surge protectors have been designed to protect your sensitive telephone, datacom and instrumentation equipment against harmful lightning surges and electrical transients.
|
|
16-64 Wire, Wallmount
Screw Terminal, QC66, ATT110
The E280 concept is based on the use of plug-in modules to protect
telecom and data lines. The E280 line covers all multi-line telephone
(PBX) and data installation configurations: there is an E280
module that is suitable to support for every type data line and/or ac power line to 220Vac.
|
|
8 Wire, Surface Mount
RJ45/RJ11
Designed to protect Power-Over-Ethernet (POE)
(Mode B) network devices with transmission speeds
up to 100BaseT. All eight pins are protected by a
carefully designed circuit that isolates data from
ethernet power lines. The ultra-sharp clamping
response permanently eliminates transients from
your POE applications.
|
|
16-32 Port, Rackmount
RJ45
The RAK series of Rack Mount and Wall Mount Standoff protectors will ensure the reliable operation of networked equipment connected to 10/100/1000BASE T Ethernet, PoE, Cable, CCTV, RS422, RS232, ISDN, T1, DDS, Dial-up and most other communication interfaces.
|
|
9,15,25 Wire, Surface Mount
DB9, DB15, DB25
The RAK series of Rack Mount and Wall Mount Standoff protectors will ensure the reliable operation of networked equipment connected to 10/100/1000BASE T Ethernet, PoE, Cable, CCTV, RS422, RS232, ISDN, T1, DDS, Dial-up and most other communication interfaces.
|
|
