 |
|
 |
 
Equipment Level
Equpiment Level (cont.)
DS250VG
|
CITEL model DS250VG is a heavy duty AC Surge Protective Device (SPD) for high risk, low tolerance electrical service entrance applications. The DS250VG provides protection against the direct and indirect effects of lightning and is particularly useful in a high lightning area where the risk of heavy surge current or even direct strike is high, i.e. buildings equipped with lightning rods.
UL1449 3rd Edition
Data Sheet
|
DS150E
|
CITEL model DS150E is a heavy duty AC Surge Protective Device (SPD) for high exposure applications such as direct lightning strikes, capacitor bank switching and large inductive loads. The DS150E is a single pole device that incorporated a multi-varistor circuit.It offers unmatched mechanical flexibility and can be installed in various worldwide system configurations with voltages up to 480V AC.
UL1449 3rd Edition
Data Sheet |
DS100EG
|
CITEL model DS100EG is a heavy duty AC Surge Protective Device (SPD) for the Neutral (N) to Ground (PE) line mode. It is associated with either the CITEL model DS150E or DS250VG protection modules. The DS100EG provides common plus differential mode protection for a 1, 2 or 3 phase AC power network with a neutral and is in accordance with IEC60364-5-534 standard, «CT2» configuration.
UL1449 3rd Edition
Data Sheet |
DS70RS
|
CITEL model DS70RS is a heavy duty AC Surge Protective Device (SPD) for high risk electrical service entrance and branch panel applications. Available in all single, split or three phase configuration up to 690 Vac.
UL1449 3rd Edition
Data Sheet |
DS40 
|
CITEL model DS40 is a standard duty AC Surge Protective Device (SPD) used in distribution or control panel applications. The DS40 is a single pole module that can be combined with other DS40 modules or a DS40G (N-G Mode Only) module. It is configurable for all 1, 2, and 3 phase application up to 480V AC.
UL1449 3rd Edition
Data Sheet
|
DS240
|
CITEL model DS40 is a standard duty AC Surge Protective Device (SPD) used in distribution or control panel applications. The DS40 is a single pole module that can be combined with other DS40 modules or a DS40G (N-G Mode Only) module. It is configurable for all 1, 2, and 3 phase application up to 480V AC.
Data Sheet
|
DS40G 
|
CITEL model DS40G is a standard duty AC Surge Protector (SPD) used in distribution or control panel applications. The module is used only in the Neutral (N) to Ground (PE) mode and must be used in combination with 1 or more model DS40 Series.
UL1449 3rd Edition
Data Sheet |
|
|
|
 |
 |
|
